Home > Ametek > SW 5250A

Ametek SW 5250A SmartWave High Performance AC/DC Power Source

Manufacturers Part #: SW 5250A
SmartWave High Performance AC/DC Power Source 5250 VA
Your Price: $14,995.00
In Stock Ships in 1 to 2 Business Days
  • Description
  • Datasheets
Ametek SW 5250A SmartWave High Performance AC/DC Power Source

The Elgar SmartWave SW 5250A uses transformerless, direct coupled amplifiers and a true arbitrary waveform generator based controller. This technology allows you to create, edit and generate complex waveforms with high DC content for critical ATE and power line disturbance simulation testing.

The SmartWave can create complex waveforms with high DC content for simulating real world power irregularities, including phase controlled sub-cycle or multi-cycle dropouts, spikes, sags, surges, frequency excursions, plus frequency and voltage ramps (sweeps). The unit can also generate clipped waveforms, harmonic distortion, high current inrush, and other complex waveshapes.

  • Arbitrary waveforms
  • 2 Hz to 6 kHz standard output frequencies
  • 1Ø to 3Ø programmable
  • BNC outputs for scope viewing of waveforms (1 MΩ Load Drive)
  • Output Power: 5550 VA: 1Ø or 3Ø
  • AC or DC Output Voltage: 0 to 156 Vrms L-N, range 1; 0 to 312 Vrms L-N, range 2
  • Current Per Phase: 13/16A to 135V in 156V range; 6.5/13A to 270V in 312V range per 1750/1850 VA module
  • Frequency Range: DC or 2 Hz to 6 kHz. Specifications apply DC, 40 Hz to 5 kHz. (For output frequencies greater than 1 kHz, the max slew rate allowed is 1 kHz per second)
  • Max Total Harmonic Distortion (Full Linear Load or No Load): 0.25% max, 40 to 100 Hz; 0.5% max to 500 Hz; and 1% max to 1 kHz plus 1%/kHz to 5 kHz
  • AC Noise Level: >60 dB rms below full output voltage
  • Amplitude Stability With Remote Sense: ±0.1% of full scale over 24 hours at constant line, load and temperature
  • Line Regulation (DC, or 40 Hz to 5 kHz): ±0.025% of full scale for a ±10% input line change
  • Load Regulation: ±0.025% of full scale voltage for a full resistive load to no load; above 1 kHz, add ±0.01%/kHz
  • Voltage Accuracy: ±0.1% of range. Above 1 kHz, add 0.2%/kHz. Add ±0.1% of full scale for "AC PLUS DC" mode
  • Voltage Resolution: 0.05% of full scale
  • Frequency Accuracy: ±0.01% at 25°C ±0.001%/°C
  • Frequency Resolution: 40 Hz to 99.99 Hz: 0.01 Hz, 100 Hz to 999.9 Hz: 0.05 Hz, 1000 Hz to 5000 Hz: 0.5 Hz
  • Phase Accuracy, Phase-to-Phase Balanced Linear Resistive Load: ±1°, 40 Hz to 1 kHz, plus ±1°/kHz above 1 kHz
  • Phase Angle Resolution: 0.1°
  • Remote Output Voltage Sense: 5 Vrms total lead drop, max
  • Interface: IEEE-488.2
  • Input Voltage: 187 to 264 Vrms, 3 Phase, 47 to 63 Hz
  • 19" (483 mm) W x 8.75" (222 mm) H x 23.5" (597 mm) D
  • Weight: 127 lbs (57.5 kg)

Free U.S. Ground Shipping*
Chat with a Bell Electronics representative
Bell Electronics NW, Inc.
1150 Raymond Avenue SW
Renton, Washington 98057-3125 U.S.A.

Telephone: 1-800-366-5240
International: +1-253-395-0707
Fax: 253-395-0808

Cage Code: 1R3V4