Electronics & Innovation 3200L Linear Power Amplifier, 250 kHz to 150 MHz, Class A, 200 WBrand New
The E&I 3200L Amplifier is a rugged source of RF power, useful for RFI/EMI, HF and VHF transmitters, plasma equipment, nuclear accelerators and general laboratory applications. The 3200L represents E&I's commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
The E&I 3200L produces 200 Watts of class A linear power output over the entire frequency range from 250 kHz to 150 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 53 dB with a typical gain flatness of ±1.5 dB.
The 3200L is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM. FM, SSB, pulsed and other complex modulation schemes.
The 3200L is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF figures.
- Class of Operation: Class A
- Frequency Range: 250 kHz to 150 MHz
- Rated Power Output: 200 W
- Power Gain: 53 dB
- Gain Flatness: ±1.5 dB
- Input Power for Rated Output: 1.0 mW / 0 dBm
- Input Impedance: 50 Ohms
- Output Impedance: 50 Ohms
- Harmonic Level: <-24 dBc
- Size (H x W x D): 13.1" x 16.7" x 20.5" (333.2 mm x 424.4 mm x 520.1 mm)
- Weight: 80 lbs (36.3 kg)
- 100 - 240 Vac; 47-63 Hz