Electronics & Innovation A1000 RF Power Amplifier, 300 kHz to 35 MHz, 1000 WBrand New
The E&I A1000 Amplifier is a rugged source of RF power, useful for ultrasonics, HF transmitters, RFI/EMI, plasma equipment and general laboratory applications. The A1000 represents E&I's commitment to providing RF power amplifiers of the highest quality, durability and ruggedness.
The E&I A1000 produces 1000 Watts of class A linear power output over the entire frequency range from 300 kHz to 35 MHz. It has very low harmonic distortion along with low IMD products. Operation over the band is achieved without the need for any band switching or indeed any adjustments. The power gain is rated at 60 dB with a typical gain flatness of ±2 dB. The A1000 is compatible with most signal generators, frequency synthesizers, sweep generators and other laboratory signal sources. It accurately reproduces all waveforms within its power and frequency ranges: AM, FM, SSB, pulsed and other complex modulation schemes.
The A1000 is built to withstand a 13 dBm input (1.0 Volt RMS) for any VSWR load condition. The internal switched mode power supply is very conservatively rated, in order to facilitate operation over a large range of line conditions and temperatures. The forced air cooling provides for low internal temperatures, providing long term reliability. The RF power is delivered by rugged DMoS FETs, de-rated to provide for excellent MTBF.
- Class of Operation: Class A
- Frequency Range: 300 kHz to 35 MHz
- Rated Power Output: 1000 W
- Power Gain: 60 dB
- Gain Flatness: ±2.0 dB
- Input Power for Rated Output: 1.0 mW / 0 dB
- Input Impedance: 50 Ohms
- Output Impedance: 50 Ohms
- Size (H x W x D): 52" x 20.5" x 20.1" (635 mm x 432 mm x 508 mm)
- Weight: 350 lbs (160 kg)
- 208 Vac; 3-Phase; 47 - 63 Hz