Fluke Ti25 Thermal Imager
Optimized for industrial, electrical, electronic applications.
The Fluke Ti25 Thermal Imaging Camera is the perfect tool to add to your problem solving arsenal. Built for tough work environments, this high-performance, fully radiometric infrared camera is ideal for troubleshooting electronic circuitry, electrical installations, electro-mechanical equipment, process equipment, HVAC/R equipment and others.
Typical applications:
- Component, PC board troubleshooting
- Inside electrical distribution and service (switch gear, panels, controls, fuses, transformers, receptacles, lighting, conductors, overhead buses, motor control centers)
- Motors, pumps and mechanical (electric motors and generators, pumps, compressors, evaporators, bearings, couplings, gearboxes, gaskets/seals, belts, rollers, disconnects)
- Process (tanks and vessels, pipes, valves and traps, reactors, process insulation)
- HVAC/R (air conditioning, heating, air handlers, refrigeration)
- Outside electrical distribution for utilities (transformers, bushings, insulators, transmission lines, other exterior conductors, service connections, disconnects, capacitor banks)
Fluke IR-Fusion Technology
See things both ways - infrared and visual (visible light) images fused together communicating critical information faster and easier - traditional infrared images are no longer enough. IR-Fusion, a patent-pending technology that simultaneously captures a digital photo in addition to the infrared image and fuses it together taking the mystery out of IR image analysis. IR-Fusion is standard on the Ti25.
To find out more click "Fusion".
| |
Ti25 |
Ti10 |
| Temperature: |
| Temperature measurement range (not calibrated below -10 °C) |
-20 °C to +350 °C (-4 °F to + 662 °F)(two ranges) |
-20 °C to +250 °C (-4 °F to + 482 °F) |
| Accuracy |
±2 °C or 2 % (whichever is greater) |
±5 °C or 5 % (whichever is greater) |
| On-screen emissivity correction |
Yes |
-- |
| Imaging performance |
| Field of view |
23° x 17° |
| Spatial resolution (IFOV) |
2.5 mRad |
| Minimum focus distance |
Thermal lens: 15 cm (6 in); Visible (visual) light lens: 46 cm (8 in) |
| Focus |
Manual |
| Image frequency |
9 Hz refresh rate |
| Detector type |
160 X 120 focal plane array, uncooled microbolometer |
| Infrared lens type |
20 mm F = 0.8 lens |
| Thermal sensitivity (NETD) |
≤ 0.1 °C at 30 °C (100 mK) |
≤ 0.2 °C at 30 °C (150 mK) |
| Infrared spectral band |
7.5 µm to 14 µm |
| Visual camera |
640 x 480 resolution |
| Image presentation |
| Palettes |
Ironbow, blue-red, high contrast, amber, hot metal, grey |
Ironbow, blue-red, high contrast, grey |
| Level and span |
Smooth auto-scaling and manual scaling of level and span |
| Minimum span (in manual mode) |
2.5 °C (4.5 °F) |
5 °C (9 °F) |
| Minimum span (in auto mode) |
5 °C (9 °F) |
10 °C (18 °F) |
| IR-Fusion® information |
Full Infrared with MAX, MID, or MIN automatic blending; and Picture-in-Picture with MAX, MID, or MIN automatic blending Visual and IR blending |
Full Infrared or Picture-in-Picture |
| Picture-In-Picture (PIP) |
Three levels of on-screen IR blending displayed in center 320 x 240 pixels |
100 % IR displayed in center 320 x 240 pixels |
| Full screen (PIP off) |
Three levels of on-screen IR blending displayed in center 640 x 480 LCD |
100 % IR displayed in center 640 x 480 LCD |
| Voice annotation |
| Voice annotation |
60 seconds maximum recording time per image |
-- |
| Image and data storage |
| Storage medium |
SD memory card (2 GB memory card will store at least 1200 fully radiometric (.is2) IR and linked visual images each with 60 seconds voice annotations or 3000 basic (.bmp) IR images |
| File formats |
Non-radiometric (.bmp) or fully-radiometric (.is2). No analysis software required for non-radiometric (.bmp) files |
| Export file formats w/SmartView™ software |
JPEG, BMP, GIF, PNG, TIFF, WMF, EXIF, and EMF |
| Model Number |
Product |
List Price |
Our Price |
Add to Cart |
| Fluke Ti25 |
Thermal Imager, IR-Fusion |
$7,495.00 |
$7,495.00 |
 |
| Fluke Ti10 |
Thermal Imager, IR-Fusion |
$4,495.00 |
$4,495.00 |
|
| Included Accessories: |
| Included: |
- Thermal imaging camera w/20 mm lens
- SmartView™ analysis and reporting software
- 2 GB SD Memory Card
- SD Card Reader for downloading images into your computer
- Rugged hard carry case and portable soft carry case
- Hand strap
- Rechargeable internal battery
- AC charger/power supply
- Printed Users Manual
|
|
| Optional Accessories: |
| Fluke Ti CAR CHARGER |
Car Charger for Ti10/Ti20/Ti25 |
$110.00 |
$110.00 |
|
|
