Home > Stanford Research > SR650

Stanford Research SR650 Programmable High Pass and Low Pass Filter

Refurbished
Manufacturers Part #: SR650
Programmable High Pass and Low Pass Filter
Your Price: $2,495.00
In Stock Ships in 1 to 2 Business Days
  • Description
  • Datasheets
Stanford Research SR650 Programmable High Pass and Low Pass Filter

The SR650 is a Programmable High Pass and Low Pass Filter. Each instrument channel has a low-noise preamplifier, a precision low-pass filter section, a precision high-pass filter section, and an output amplifier. The filter is an 8-pole, 6-zero elliptic-type with 115 dB per octave rolloff, 0.1 dB of passband ripple, and 80 dB stopband attenuation. Cutoff frequencies can be set between 1 Hz and 100 kHz, making the SR650 ideal for applications including anti-aliasing, audio analysis, and general frequency-domain signal conditioning.

Each filter channel has a floating, differential input with 1 MΩ input impedance and 6 nV/vHz of input noise. The analog ground for each filter channel is available at a rear-panel BNC connector to provide complete flexibility in grounding. The filter grounds may be tied to the instrumentís chassis ground or to any other point. Both AC and DC input coupling can be selected, and an invert key allows the phase of the signal to be shifted by 180° with a single key press. Up to 60 dB of preamplifier gain can be specified in 10 dB increments. A simple offset adjust screw lets you null DC components in your signal.


Features:
  • Two independent filter channels
  • 115 dB/octave rolloff
  • 1 Hz to 100 kHz frequency range
  • 0.1 dB passband ripple
  • 6 nV/vHz input noise
  • Up to 80 dB of gain
  • GPIB and RS-232 interfaces

 
Free U.S. Ground Shipping*
Chat with a Bell Electronics representative
Bell Electronics NW, Inc.
1150 Raymond Avenue SW
Renton, Washington 98057-3125 U.S.A.

Telephone: 1-800-366-5240
International: +1-253-395-0707
Fax: 253-395-0808

Cage Code: 1R3V4