|
|
 |
 |
|
BK Precision 5492GPIB Digital Multimeter, Bench, Dual Display, 5 1/2 Digit, with GPIB |
|
|
|
|
|
- A dual, Vacuum Fluorescent Display (VFD) that allows two properties of input signal to be displayed at the same time. (e.g., DC voltage on one display and AC voltage on the other)
- Remote operation via RS-232 interface (standard) or IEEE-488 interface (optional)
- 120,000, 40,000, and 4,000 counts for different measuring rate: Slow Rate (120,000 counts) - 2 readings/sec; Medium Rate (40,000 counts) - 5 readings/sec; Fast Rate (4,000 counts) - 20 readings/sec
- 1 µV sensitivity in Vdc measurement
- True RMS Vac with 20 Hz to 100 kHz bandwidth
- (Vac+Vdc) RMS and (Iac+Idc) RMS, calculated
- Selectable 2-wire and 4-wire resistance measurements
- Resistance measurements up to 120 MΩ with 1 mΩ resolution at slow reading rate or up to 300 MΩ with 10 mΩ and 100 mΩ resolution at medium and fast reading rate respectively
- Wide dc and ac current measurement ranges: 12 mA to 12 A
- Frequency measurements greater than 1 MHz with 0.01 Hz best resolution
- dBm measurement with variable reference impedance from 2 Ω to 8000 Ω and audio power measurement capability
- Zeroing mode (REL) to offset residual reading before taking a measurement
- Compare mode to determine if a measurement is within, above, or below a designated range (Hi/Lo/Pass)
- Dynamic recording mode to keep minimum and/or maximum readings of measurements
- CAL mode to provide electronic closed-case calibration (no internal adjustments)
- RS-232 Interface
- GPIB Interface
- Warranty: 1 Year
- Power Source: 90 to 264 Vac; 50/60 Hz
- Accessories Supplied: Instruction Manual, Power cord, Protective holsters (Front and Rear), Test leads, AC 01 Cap for TL 36
- Dimensions (W x W x D) & Weight: 255 x 105 x 305 mm; 3.0 kg
|
|
  |
|
|
The B+K Precision Dual Display Multimeter model 5492 is a 5-1/2 digit multimeters with selectable count resolutions up to 120,000 count. It is designed for bench-top, field service, and system applications with a high performance to price ratio. One set of Test Leads and AC 01 caps for TL 36 are included with each 5492. |
|
|
| Pricing Information |
|
| Brand New Product |
Pricing / Order Information . . . |
Our Price |
 |
| B&K Precision 5492GPIB |
Digital Multimeter, Bench, Dual Display, 5 1/2 Digit, with GPIB |
$849.00 |
 |
| BK Precision 5492 |
Digital Multimeter, Bench, Dual Display, 5 1/2 Digit |
$715.00 |
|
| Additional Accessories: |
| B&K Precision AK 5491 |
Software and RS-232 cable for 5491A / 5492 |
$102.00 |
|
| B&K Precision KC 01 |
4 Wire Test Leads with Kelvin Clips |
$154.96 |
|
| B&K Precision RK 01 |
Rack Mount Kit for single 5491A or 5492 |
$50.96 |
|
|
All prices are subject to change without notice.
All sales are subject to Bell Electronics NW, Inc. Terms and Conditions
as listed on this web site under Sales
/ Ordering Information. All specifications are listed for reference only. Photos are representative and items supplied may differ in appearance. Please see our Site Use
Terms & Conditions for further information. |
| This web site is designed for optimum viewing with current versions of
Internet Explorer
and Netscape Navigator. |
|
|
