Bell Electronics NW, Inc.
Call Toll Free: 1-800-366-5240
Home Customer Service Rental / Lease FAQ We Purchase Product Catalog
Search by Model
 
Click Here for Search Help
Select by Category
Products

Manufacturer

Sitemap
Bookmark this Page
Email Page
Print this Page
  

Fluke 271 Function Generator, DDS, 10 MHz

 
  • Frequency Range: 0.1 mHz to 10 MHz
  • Amplitude: 5 mV to 20 V pk-pk open circuit (2.5 mV to 10 V into 50 Ω / 600 Ω)
  • Output impedance: 50 Ω or 600 Ω switchable
  • DC offset: ± 10 V from 50 Ω / 600 Ω offset plus signal peak limited to ±10 V from 50 Ω / 600 Ω
  • Amplitude Modulation: Carrier frequency 0.1 mHz to 10 MHz
  • Frequency Shift Keying (FSK): Phase coherent switching between two frequencies at a rate defined by the switching signal source
  • Arbitrary capability with storage for five user defined waveforms
  • Multiple standard and complex waveforms recalled from internal memory
  • Extensive modulation capabilities include sweep, AM, Gating, Trigger/Burst, FSK and Hop
  • GPIB and RS-232 interfaces
  • Three year warranty
  • Power: 100 Vac, 110 to 120 Vac or 220 to 240 Vac ±10 %, 50/60 Hz ac by internal adjustment; 30 VA max.
  • Size: 3U (130 mm) height; half-rack (212 mm) width, 330 mm long
  • Weight: 4.1 kg (9 lb)
 
Fluke 271
Fluke 271
Click Here to Magnify Image

The 271 is a high performance function generator using Direct Digital Synthesis techniques. A wide variety of standard waveforms are provided and an arbitrary waveform capability allows it to be used to generate non-standard and user-defined waveforms. Extensive modulation capabilities make this a highly versatile signal source.

Waveforms
Standard waveforms are sine, square, positive pulse, negative pulse, triangle, ramp up, ramp down. Additionally arbitrary waveforms, multi-level squarewaves, waveform hopping and pseudo-random noise can be generated.

Direct digital synthesis for accuracy and stability
Direct digital synthesis (DDS) is a technique for generating waveforms digitally, using a phase accumulator, a look-up table and a DAC. The accuracy and stability of the resulting waveforms is related to that of the crystal master clock. The DDS generator offers not only exceptional accuracy and stability but also high spectral purity, low phase noise and excellent frequency agility.

A wide range of waveforms
The Fluke 271 generates high quality sine, square and pulse waveforms over the full frequency range of 0.1 mHz to 10 MHz. Triangle waveforms, ramp waveforms and multi-level square waves can also be generated, subject to some limitations in the maximum useable frequencies. Variable symmetry/duty-cycle is available for all waveforms.

Arbitrary waveform capability
Arbitrary waveforms can be loaded via the digital interfaces and then used in a similar way to the standard waveforms. Up to five arbitrary waveforms of 1024 10-bit words can be stored in non-volatile memory. The waveform clock is 27.48 MHz maximum. This facility considerably expands the versatility of the 271, making it suitable for the generation of highly complex waveform patterns. In addition, the 271 offers numerous "complex" waveforms pre-defined in ROM. These include commonly used wave shapes such as sine x/x, decaying sinewave, and exponential rise and fall.

Locked generators
The signals from the Clock In/Out socket and the Sync Out socket can be used to phase lock two or more generators. This feature can be used to generate multi-phase waveforms or locked waveforms of different frequencies.

Powerful modulation modes:

Sweep
All waveforms can be swept over their full frequency range at a rate variable between 10 milliseconds and 15 minutes. The sweep is fully phase continuous. Sweep can be linear or logarithmic, single or continuous. Single sweeps can be triggered from the front panel, the trigger input, or the digital interfaces. Two sweep markers are provided, which are adjustable while sweep is running. The markers can provide a visual indication of frequency points on an oscilloscope or chart recorder.

AM
Amplitude modulation is available for all waveforms and is variable in 1 % steps, up to 100 %.

FSK
Frequency shift keying provides phase coherent switching between two selected frequencies at a rate defined by the switching signal source. The rate can be set from dc to 50 kHz internally, or dc to 1 MHz externally.

Trigger/Burst
All waveforms are available as a triggered burst, whereby each positive edge of the trigger signal will produce one burst of the carrier, starting and stopping at the phase angle specified by the start-stop phase setting. The number of cycles in the burst can be set between 0.5 and 1023.

Gated
The gated mode turns the output signal on when the gating signal is high and off when it is low. Both triggered and gated modes can be operated from the internal trigger generator (0.005 Hz to 50 kHz) or from an external source (dc to 1 MHz).

Waveform hop
The generator can be set up to 'hop' between a number of different waveform setups, either at a pre-determined rate or in response to a manual or bus trigger. Up to 16 different hop waveforms can be defined in terms of frequency, amplitude, function, offset and duration, which is variable in 1 ms steps up to 60 seconds.

Noise generation
The Fluke 271 can be set to simulate wide band random noise with adjustable amplitude and offset.

Additional Product Information . . .
    Data Sheet
    Manuals
Pricing Information
Brand New Product Pricing / Order Information . . . Our Price Order This Product Online
Fluke 271 Fluke 271 Function Generator, DDS, 10 MHz $1,550.00 Add this item to your Shopping Cart
Other Similar Models:
Fluke 281 Fluke 281 Waveform Generator, Universal $2,065.00 Add this item to your Shopping Cart
Fluke 282 Fluke 282 Waveform Generator, Universal, 2 Channel $3,515.00 Add this item to your Shopping Cart
Fluke 284 Fluke 284 Waveform Generator, Universal, 4 Channel $5,690.00 Add this item to your Shopping Cart
        Optional Accessories        
Rack Mounts & Hardware
Fluke Y200F Rack Mount Kit, Full, 271/281/292/294 $320.00 Add this item to your Shopping Cart
Fluke Y200H Rack Mount Kit, Half, 271/281/291 $320.00 Add this item to your Shopping Cart
Cables & Hardware
Fluke Y8021 Cable, IEEE-488 (1 m) $220.00 Add this item to your Shopping Cart
Fluke Y8022 Cable, IEEE-488 (2 m) $275.00 Add this item to your Shopping Cart
Software
Fluke SW200ARB Fluke SW200ARB Waveform Manager Plus, 27x Generators $410.00 Add this item to your Shopping Cart
  Factory New   Order This Product Online  
All prices are subject to change without notice.
All sales are subject to Bell Electronics NW, Inc. Terms and Conditions as listed on this web site under Sales / Ordering Information. All specifications are listed for reference only. Photos are representative and items supplied may differ in appearance. Please see our Site Use Terms & Conditions for further information.
This web site is designed for optimum viewing with current versions of Internet Explorer and Netscape Navigator.
Copyright © Bell Electronics NW, Inc. Legal Information Privacy Policy Contact Us About Bell Electronics Catalog Request