|
|
 |
 |
|
Fluke 355 Clamp Meter, AC/DC, True RMS, 2000 A |
|
|
|
|
|
- True-RMS measurements
- Reliably handle a wide range of high-current applications with 2000 A ac + dc true-rms, 1400 A ac, and 2000 A dc
- The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors and busbars
- CAT IV 600 V, CAT III 1000 V rating for added user protection
- In-rush current measurement captures accurate and repeatable 'power-on' surge current
- High voltage measurement of 1000 Vac + dc true-rms, 600 Vac, and 1000 Vdc allows the user to perform multiple tests with only one tool
- Resistance to 400 KΩ coupled with a continuity beeper provide the convenience of a multimeter
- Accurately measure frequency up to 1 kHz for optimum troubleshooting
- Quickly analyze readings using the MIN, MAX, and AVG functions
- A large backlit display allows for easy visibility in low-lit areas
- Use the display hold feature to capture readings even when the display cannot be viewed
- Use the low-pass filter to smooth out noisy loads and stabilize readings
- Included Accessories: C43 soft carrying case, 6 AA batteries, user manual, TL224 1.5 m silicone rubber test leads, TP2 test probes, AC285 alligator clips
- Three year warranty
- Dimensions (H x W x D): 300 mm (12 in) x 98 mm (3.75 in) x 52 mm (2 in)
- Weight: .815 kg (1.8 lbs)
|
|
| Fluke 355 |
 |
 |
|
|
Industrial plants and large facilities often have equipment and installations that draw greater than 1000 A. As with other current measurements, it is not practical to disconnect the equipment to make a series of current measurements. The ability to check that an expensive system has been installed correctly, troubleshoot large loads, and make accurate measurements on UPS and Variable Frequency drives with noisy loads is also essential.
In industrial settings, compliance with NFPA 70E safety standards, while making measurements, is critical. Fluke has addressed this by designing these products to meet CAT IV 600 V and CAT III 1000 V ratings. The expanded jaw size provided with these current clamps allows easy clamping around large conductors and busbars normally found in high-current systems and equipment. The large jaw size, high accuracy, high-current capability, user friendly features and CAT IV 600 V, CAT III 1000 V ratings make these two new clamps the most desirable high-current clamp meters on the market today. |
|
|
| Pricing Information |
|
| Brand New Product |
Pricing / Order Information . . . |
Our Price |
 |
| Fluke 355 |
Fluke 355 Clamp Meter, AC/DC, True RMS, 2000 A |
$693.00 |
 |
| Other Similar Models: |
| Fluke 353 |
Fluke 353 Clamp Meter, AC/DC, True RMS, 2000 A, Amps Only |
$575.00 |
|
 Optional Accessories |
| Test leads, Probes and Clips |
| Fluke AC285 |
SureGrip™ Alligator Clips |
$16.69 |
|
| Fluke TL224 |
SureGrip™ Insulated Test Leads |
$21.12 |
|
| Fluke TP2 |
Slim Reach Test Probes (2 mm) |
$13.34 |
|
|
| Cases and Holsters |
| Fluke C43 |
Soft Carrying Case |
$55.16 |
|
|
All prices are subject to change without notice.
All sales are subject to Bell Electronics NW, Inc. Terms and Conditions
as listed on this web site under Sales
/ Ordering Information. All specifications are listed for reference only. Photos are representative and items supplied may differ in appearance. Please see our Site Use
Terms & Conditions for further information. |
| This web site is designed for optimum viewing with current versions of
Internet Explorer
and Netscape Navigator. |
|
|
