|
|
 |
Stanford Research SR785 Dynamic Signal Analyzer |
| Dynamic Signal Analyzer, Dual Channel, dc to 102.4 kHz |
|
|
|
|
|
- Bandwidth: dc to 102.4 kHz
- Spans: 195.3 mHz to 102.4 kHz or 191 mHz to 100 kHz. The two displays can have different spans and start frequencies.
- Real-time bandwidth: 102.4 kHz (highest FFT span with continuous data acquisition and averaging)
- 20-pole/20-zero curve fitting
- Channels: 2
- Input impedance: 1 M Ohm + 50 pF
- Dynamic range: 90 dB
- Dynamic range in swept-sine mode: 145 dB
- Frequency Domain Measurements: Frequency Response, Linear Spectrum, Cross Spectrum, Power Spectrum, Coherence, Power Spectral Density
- Standard measurement groups: FFT, Time/Histogram, Correlation, Octave, Swept-Sine, Order Tracking
- Time Domain Measurements: Time Record, Cross-Correlation, Auto-Correlation, Orbit
- Amplitude Domain Measurements: Histogram, PDF, CDF
- Hardcopy output to printers and plotters
- 3.5 inch disk drive
- GPIB (IEEE-488) and RS-232 interfaces
- Monitor: CRT Monochrome, 800 x 600 resolution
- Connectors: BNC(f)
- 100, 120/220, 240 Vac; 50/60 Hz operation
- Weight: 56 lb; Size: 210 mm (8.25 in)H x 432 mm (17.0 in)W x 610 mm (24.0 in)D
|
|
  |
|
|
The SR785 Two-Channel Dynamic Signal Analyzer is a precision, full-featured signal analyzer that offers state-of-the-art performance at a price that's less than half that of competitive analyzers. The SR785 incorporates new firmware and hardware that make it the ideal instrument for analyzing both mechanical and electrical systems. For measurements involving servo systems, control systems, acoustics, vibration testing, modal analysis, or machinery diagnostics, the SR785 has the features and specifications to get the job done.
|
| Pricing Information |
|
| Refurbished Product |
Pricing / Order Information . . . |
|
Our Price |
|
| SR785 |
Dynamic Signal Analyzer, Dual Channel, dc to 102.4 kHz |
|
$7,895.00 |
 |
|
All prices are subject to change without notice. Some option combinations may not be available.
All sales are subject to Bell Electronics NW, Inc. Terms and Conditions
as listed on this web site under Sales
/ Ordering Information. All specifications are listed for reference only. Photos are representative and items supplied may differ in appearance. Please see our Site Use
Terms & Conditions for further information. |
| This web site is designed for optimum viewing with current versions of
Internet Explorer
and Netscape Navigator. |
|
|
