|
The Agilent 34907A module for the 34970A Data Acquisition/Switch
Unit allows great flexibility for a variety of sense and control
applications. It combines two 8-bit ports of digital input and output,
a 100 kHz gated totalizer, and two ±12V analog outputs -
all on a single earth-referenced module. The digital inputs and
totalizer input may be included in a scan. Alarm limits for the
digital and event counter inputs are evaluated continuously, capturing
and logging alarm conditions even between scans.
Digital Input/Output
Use the digital outputs with an external power supply to control
microwave switches and attenuators, solenoids, power relays, indicators,
and more. Use the digital inputs to sense limit switch and digital
bus status. There are no complex handshake modes; reads and writes
are initiated either from the front panel or the bus.
Totalize Input
Count events from devices like photo interrupters, limit switches,
and Hall-effect sensors.
It keeps an updated total which can be read via the front panel
or programmatically at any time. With 26 bits of resolution, it
can count events at full speed for nearly 45 minutes without an
overflow.
Analog Output
Use the two electronically calibrated analog outputs to source
bias voltages to your device under test, to control your analog
programmable power supplies, or use the outputs as setpoints for
your control systems. The outputs are programmed directly in volts,
either from the front panel or from the bus.
|
