Agilent 11664E Detector .01 to 26.5 GHz, APC-3.5 mm(m), for 8755/8756/8757 SeriesRefurbished
The11664E Detector consists of a single Schottky diode housed in a metal frame with an APC 3.5 connector. RF signal levels (dependent upon scalar network analyzer used) from -60 to + 16 dBm in the frequency range of 10 MHz to 26.5 GHz can be detected. The 11664E detector requires the use of either an 8755C/8756A/8757A scalar network analyzer (recommended equipment). The use of three 11664E detectors, or two detectors and a bridge, enables simultaneous (amplitude only) transmission and reflection measurements via the analyzer CRT. The supplied cable markers are used for identification when more than one detector is used in a test setup.
- Frequency Range: 10 MHz to 26.5 GHz
- Range: +16 dBm to -60 dBm
- Maximum input power: +20 dBm (100 mW)
- Input impedance: 50 ohms
- Connector: APC-3.5 mm(m)
- Shipping weight: 3 lb