Categories

manufacturers

information

Click to Enlarge Image

Ametek / Sorensen DHP 130-76 M9D Programmable DC Power Supply, 0 to 130 Vdc, 0 to 76 A, with GPIB

Manufacturers Part #: DHP 130-76 M9D M17

Programmable DC Power Supply, 0 to 130 Vdc, 0 to 76 A, with GPIB

Refurbished & Tested 6 Month Warranty Also Available for RENT
Your Price: $1,895.00
In Stock Ships in 1 to 2 Business Days
QTY:
Ametek / Sorensen DHP 130-76 M9D Programmable DC Power Supply, 0 to 130 Vdc, 0 to 76 A, with GPIB

The Sorensen DHP Series provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 50 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current.

The DHP Series uses control technology permits up to nine (9) steps per sequence with a maximum sequence duration of up to 27.75 hours.

This family has standard analog and a variety of combinations of IEEE-488.2, RS-232 and/or isolated analog input control interface options.

Option M9D = Internal IEEE-488.2 Interface
Option M17 = Down programming option for ≥80V models

Features:
  • Output: 0 to 130 V, 0 to 76 A
  • Output Power: 9.88 kW
  • Unique Controls and Commands:
    • Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
    • External Shutdown: An external shut down to inhibit the output
    • Up/down arrows control voltages, step changes and current
  • Digital Displays:
    • Power supply rating
    • Output power, voltage and current
    • All power, voltage and current set points and limits
    • Present and highest AC input voltage
    • Present and highest air inlet temperature
    • Power and auto-step sequence settings
    • Calibration set-up
    • Remote operation set-up
    • Diagnostics fault status summary
  • Protection and Safety
    • Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
    • Front Panel Lockout: Most front panel controls are disabled when operated remotely
    • Overvoltage, over temperature, surge limit, soft start, brown out and short circuit protection
  • 190-253 Vac input voltage, 47-63 Hz, three phase, 3-wire plus ground, Delta or Wye input may be used (Wye does not require the neutral connection)
  • Weight: 80 lb; Size: 133 mm (5.25 in)H x 482 mm (19.0 in)W x 608 mm (24.0 in)D

Please see Datasheet for complete details and specifications.