Electronics & Innovation 601L Linear Power Amplifier, 500 kHz to 1000 MHz, Class A, 1 W

The E&I 601L Broadband Amplifier is a rugged source of RF power suitable for a variety of UHF signal distribution and general laboratory applications. It is a compact fully solid state design. It features low-level intermodulation distortion and inherent protection against short and open circuit loads. The 601L amplifies the inputs of AM, FM, SSB, pulse and other complex modulations within its output and bandwidth capability.

The E&I 601L produces 1 Watt of Class A linear output power over a frequency range of 500 kHz to 1000 MHz with a nominal gain of 40 dB (±2.5 dB). In order to provide exceptionally low levels of IMD, highly linear RF devices are used, with feedback, in the driver and output amplifier stages. All harmonics are more than 22 dB below the fundamental frequency at 1.0 Watt Pout.

• Class of Operation: Class A
• Frequency Range: 500 kHz to 1000 MHz
• Rated Power Output: 1.0 W
• Power Gain: 40 dB
• Gain Flatness: ±2.5
• Input Power for Rated Output: 0.1 mW / -10 dBm
• Input Impedance: 50 Ohms
• Output Impedance: 50 Ohms
• Harmonic Level: <-22 dBc
• Size (H x W x D): 3.5" x 7.9" x 15" (88 mm x 201.4 mm x 381.8 mm)
• Weight: 10 lbs (4.5 kg)
• 100 - 240 Vac; 47-63 Hz