Ametek / Sorensen DLM 60-50E Programmable DC Power Supply, 0 to 60 Vdc, 0 to 50 A

Ametek / Sorensen DLM 60-50E M9E Programmable DC Power Supply, 0 to 60 Vdc, 0 to 50 A, GPIB

The Sorensen DLM 60-50E Programmable DC Power Supply is designed to provide highly stable, continuously variable output voltage and current for a broad range of applications in a compact 2U ( 3½ inches high) chassis.

Both the 3 kW and 4 kW models have output voltages from 0-5 VDC to 0-600 VDC and a current range from 0-5 A to 0-450 A. The output rms noise is as low as 10 mV. The output will recover to 1% of its steady-state voltage within 1 ms for a step load change of 100% to 70% or 70% to 100%. The front panel layout makes the series extremely easy to use. Control switches include: power on, enable/ standby and local/remote.

Displays and indicators show programmed set points and operational control status. The programmed voltage, current, and overvoltage set points are displayed on two large 3½-digit LED displays. Operational Status LEDs indicate power on, shutdown, over temperature, overvoltage, constant current and voltage mode status. The Control Status LEDs indicate front-panel lockout, remote control, and standby status. IEEE- 488.2 control LEDs indicate error, service request, and remote address status.

The 3 kW Models will accept 200/230 VAC single-phase and 200/208 VAC three-phase input power.

Features:

• Output: 0 to 60 V, 0 to 50 A
• High Power Density: 3000 watts in 2U (3.5 inches) high, (19 inches wide); no top or bottom clearance spacing required
• Near Linear Ripple & Noise: Ripple as low as 2.5 mVrms, noise as low as 15 mV p-p
• Remote Control
• IEEE-488.2 / RS-232C (12 bit) (Option M9E)
• Standard analog programming 0-5 V, 0-10 V, or 0-5 kΩ
• 180-264 VAC,; 47-63 Hz; single or three phase operation
• Weight: 40 lb; Size: 87 mm (3.46 in)H x 482 mm (19 in)W x 512 mm (20.19 in)D

Please see the datasheet for complete details and specifications.